top of page
CLX-2DIM8
Price
د.ت0.000
The Crestron® CLX-2DIM8 is an eight-channel, dual-power dimming module designed for 120V lighting system applications. -136bad5cf58d_CAEN ou CAEN-MLO et controls a variety of magnetic load types including low and dimmable inc and dimmable inc voltage, neon/cold cathode and 2-wire fluorescent. Output is rated at 1920 watts (16 amps), with a total module power rating of 3840 watts (32 amps) when powered by two separate 20 amp power supplies.
Forward Phase Dimming The CLX-2DIM8 uses forward phase (rising edge) dimming to handle inductive load types such as magnetic low voltage and neon, as well as 2-wire incandescent and fluorescent_cc781905-5cde-3194-bb3b -136bad5cf58d_.
Quantity
Specification
| load control | ||
| 1 | Dimming channels | 8 |
| 2 | Dimmable Load Types | Incandescent, Magnetic Low Voltage, Neon/Cold Cathode, 2-Wire Fluorescent |
| 3 | Load capacity per channel | 16 amps (1920 watts) |
| 4 | Load capacity per group | Group 1 (Channels 1-4): 16 A ; (1920 Watts) Group 2 (channels 5-8): 16 A (1920 Watts) |
| 5 | Total module load capacity | 32 amps (3840 watts) [1] |
| Minimum load | 25 watt | |
| 6 | Line/load voltage | 120VAC, 60Hz ; requires one or two single phase power supplies (can be same phase or separate phases) |
| Connections | ||
| 1 | Via terminal block (sold separately) | LINE 1 – 2: (2) screw terminals, black, mains power inputs (per group); DIM 1 – 8: (8) screw terminals, red, load outputs (per channel); N IN 1 – 2: (2) screw terminals, white, mains supply neutral (per group); N OUT 1 – 8: (8) Screw terminals, white, load neutral (per channel); Note: Each terminal accepts 14-10 AWG wire. |
| 2 | Interconnection of modules | (2) 0.156 inch 5-pin headers; Interconnect Ports Cresnet/Override ; Each connects to the adjacent module using the provided interconnect jumper ; Connects to un CAEN-BLOCK (sold separately) when installed in the lowest position of the case |
| Controls and Indicators | ||
| 1 | REP | (1) Green LED, indicates mains power is applied to the LINE 1 terminal |
| 2 | REPORT | (1) Yellow LED, indicates Cresnet communication with the control system |
| 3 | SET UP | (1) Push button and (1) red LED, used to enter Local mode and test each channel |
| 4 | 1 – 8 | (8) red LEDs, each indicates the status of the corresponding channel |
| Environment | ||
| 1 | Temperature | 32° to 104° F (0° to 40° C) |
| 2 | Humidity | 10% to 90% RH (non-condensing) |
| 3 | heat dissipation | 26 BTU/h+ (4.7 BTU/hx load current in amps); 176 BTU/h at maximum load |
Technical sheet
bottom of page